Windows Vista VPN setup Tutorial

Go to Start -> Connect To
Click the Set up a new connection or network Option.
Scroll down to the bottom of the list and select Connect to a workplace, then click Next.
Select the Use my Internet Connection option.
For Internet Address, Enter the name or IP address of the VPN remote access server to connect to
Enter FLASHVPN as the Destination Name, and click Next.
Enter your VPN account name and password for the User Name and Password. You can select the Remember this Password option if you'd like to have the password remembered. Leave the Domain Name field blank, and click Next.
Congratulations! You're set up to use VPN. If you'd like to connect to the connection later, you can use the Connect To option in the Start menu.

Step01. click on the Start button and click “Control Panels”. This opens up the “Control Panel Home.”

Step02. click on the “Network and Internet” control panel, which is circled in red below.

Step03. click on “Connect to a network.”

Step04. click on “Set up a connection or Network.”

Step05. click on “Connect to a workplace” then click “Next.”

Step06. click “Use my Internet connection (VPN).”

Step07. enter the server information.

Step08. enter username and password.

Step09. You should see this screen next. Click the “Close” button to return to the “Network and Internet” screen.

Step10. click on “Connect to a network” again.

Step11. In the “Connect to a network” screen, you should see the WorldVPN connection that we set just up. Right–click on the Purevpn connection document (circled in red), and choose “Properties” (circled in green) from the menu.

Step12. click the “Security” tab, which is highlighted in red.

Step13. Make sure the security tab has the same settings as here. Then click on "Setting" button.

Step14. Make sure that the Data encryption section is set to "Optional encryption".

Step15. At the Pop Up window Click on "Yes"

Step16. To connect to WorldVPN, go to the Start button and click “Connect To”.

Step17. Then click on the Purevpn entry and click “Connect”.